Fluid Machinery tutors

  • Biju Chacko Assistant Professor/heat power engineering

I am currently working as assistant professor in mechanical engineering department in one of the engineering college in India for the past 7 years..i have got a masters degree in heat power engineering from national institute of technology,nagpur,India..i taugt around 10 thermal related subjects in the past 7 years.and i usually taugt problematic...

  • India
  • $13/hour
  • 1.0 yr.
  • 7.0 yr.
Dilip Kumar image

I helps so many students to clear various exams like GATE/ESE/SSC JE Exam. And lots of students gets the good result in Gate2020, ISRO 2020 and some selected in RRB JE also. I believe to make each subject very easier to my students in my way of teaching. I start teaching from the basics and go to the all level of concepts which are ask in the...

  • India
  • $13-20/hour
  • 1.0 yr.
  • 3.0 yr.
Sachin Kumar Prajapati image

I am a Machine Design, Mechanical engineer from Indian Institute of Engineering Science and Technology, Shibpur (IIEST shibpur). I worked on my thesis in the field of Tribology. I have done B tech in mechanical engineering from GIT, Jaipur from Rajasthan Technical University Kota. I got honors degree in B tech. I also appeared in National level...

  • India
  • $11-26/hour
  • 0.0 yr.
  • 5.0 yr.
Sourabh Nandi image

Dear Students,
My-self Sourabh currently working with Sulzer in position of Manager-CFD . I am ME- Mechanical with specialization in 'Jet Propulsion & Gas Turbine' from M.S.University of Baroda in 2005.
A. TEACHING STYLE
1. Why CFD or it's motivation,application of CFD (FVM), it's advantages & limitations,
2. Basics of CFD, derivation of...

  • India
  • $40-93/month
  • 0.0 yr.
  • 1.0 yr.
Pranshu Srivastava image

Teaching Assistance | Assignment | Homework | Exam Help |

I am a postgraduate Alumnus of Indian institute of technology bombay (Mumbai).

I secured all india rank 173 out of 1.85 lac (0.2 million) candidates in the GATE (Graduate Aptitude test in engineering) exam conducted in india in the mechanical engineering stream.

I have cleared...

  • India
  • $13-53/hour
  • 1.0 yr.
  • 3.0 yr.
Narender Sharma image

I am 10 times Gate qualified from 2007 to 2018 and have full command on technical knowledge.
Passed B Tech from Kurukshetra University in Honors and M Tech from MDU Rohtak simultaneously with job in Vaish College of Engineering.
I have 12 years of teaching experience with full dedication and have almost 90% results.
Students never feel bore...

  • India
  • $60/hour
  • 0.0 yr.
  • 12.0 yr.
Bhanuprakash Sahoo image

I actually care for the students more than anything else and actively involve them in learning activities.I have designed the questions of the subjects in such a way that those will cover all the concepts and syllabus in a easier way.I delivers the subject with sufficent practical examples and wonderful experiments along with that I make them...

  • India
  • $13-79/day
  • 0.0 yr.
  • 4.0 yr.
Vaibhav Mishra image

if you want to achieve excellence and core knowledge of the subjects i can be the one to take you to the zenith of the subject. i can lead u to the point where u will appreciate the subject and enjoy reading it and you can aplly those concepts to the numericals in university exams or in competitive exams to maximise your marks and gain all the...

  • India
  • $13-20/hour
  • 4.0 yr.
  • 4.0 yr.
Shrinivas H image

For educational background I have completed my Diploma in Mechanical Engineering,Batchelor of Engineering in Mechanical and Master of Technology in Mechanical Engineering from reputed Institutes.

have 10 years teaching experience in various Engineering Colleges of Mumbai University.
Gate qualified in mechanical Engineering.

I am full time...

  • India
  • $7-11/hour
  • 3.0 yr.
  • 10.0 yr.

I have a 11 years of teaching experience in chemical engineering subjects . I can teach fluid mechanics,mass transfer, heat transfer,process dynamics and control, thermodynamics and Mechanical unit operations. I admit that I do enjoy being the "sage on the stage" in my classroom, but I realize that this does little to engage my students in deep...

  • India
  • $16-20/hour
  • 6.0 yr.
  • 11.0 yr.

I have completed my graduation with 8.73 CGPA and Master with 8.93 CGPA. also, qualified gate examination with a decent score. I would like to teach you water resources engineering, hydraulic machine, irrigation engineering, hydrology, geotechnical engineering, environmental engineering, RCC and strength of materials etc. I am passionate about...

  • India
  • $8-11/hour
  • 0.0 yr.
  • 0.0 yr.
Vikas Slariya image

I am teacher by passion. I had been into teaching right after completing my +2 exams and continued with it when I was in Engineering College. After working with Corporate for 8 years I shifted to full time teaching. Once into teaching I upgraded myself to Masters Mechancial Engineering, and then joined Phd at IIT Delhi. Again due to time and...

  • India
  • $13-26/hour
  • 6.0 yr.
  • 18.0 yr.
  • Deepak C Mechanical Engineering - Thermal science Engineeri

I have qualified in GATE exam twice and I have good knowledge on all the subjects of Mechanical Engineering and allied branches.
I motivate students and guide them to get good grades...
I teach with prior preparation and make sure my students learn the concepts I explain.
I have done home tuitions and prepared poor performing students to get...

  • India
  • $4-9/hour
  • 0.0 yr.
  • 3.0 yr.

I am Akshayveer and pursuing my PhD from IIT(BHU) Varanasi. IIT(BHU) Varanasi is very reputed institute here in india, and it is very difficult to get admission here so you can imagine the caliber. I have full in depth knowledge of all subjects of Mechanical Engineering, still have unofficial teaching experience and helping students in their...

  • India
  • $26-132/hour
  • 4.0 yr.
  • 4.0 yr.
Anil Padidam image

I finished my post graduation from IIT Delhi.
There I learned how a teacher should be and what is the role of a teacher in student's life.
Very good subject knowledge.
I have good communication skills. The way I teach, the way I make the things clear these are my special advantages. This is I realized through my student's results.
In my...

  • India
  • $7-9/hour
  • 2.0 yr.
  • 10.0 yr.
  • Alok Jha Lecturer in Mechanical Engineering

If you want to achieve excellence and core knowledge of the subjects i can be the one to take you to the zenith of the subject. i can lead u to the point where u will appreciate the subject and enjoy reading it and you can aplly those concepts to the numericals in university exams or in competitive exams to maximise your marks and gain all the...

  • India
  • $13-20/hour
  • 4.0 yr.
  • 8.0 yr.
Habib Ullah image

I am currently studying at Quaid-e-azam University which is the highest ranked university in Pakistan. I am doing MS and doing my research in applied mathematics. I also do home tuitions. I teach children all A and O level courses. Also teaches all mathematics related courses like calculus 1, calculus 2, calculus 3, linear algebra,
algebra,...

  • Pakistan
  • $89-149/month
  • 1.0 yr.
  • 2.0 yr.
Mahesh Kumar image

I have done my b-tech from NIT JALANDHAR.
2016 pass out. ESE-2019 MAINS qualified
3 year teaching expirence in ENGINEERING MATHEMATICS, SOIL MECHANICS, SOM, STRUCTURE, FLUID MACHINE, TRANSPORTATION ENGINEERING, ENVIRONMENTAL ENGINEERING
I followed same methodology as discussed in prestigious coaching institution like IES MASTER, MADE EASY....

  • India
  • $132-265/hour
  • 0.5 yr.
  • 3.0 yr.
Sanjay Taneja image

Presently i am working as faculty in Mechanical engineering department and i am having almost 14 years of industrial and 17 years teaching experience.
For engineering stream i can teach, guide and motivate students based on my industrial experience. i am having good knowledge of hydraulic machines such as hydro turbine and pumps theoretically and...

  • India
  • $13-26/hour
  • 0.6 yr.
  • 17.0 yr.
Ankush Panchal image

Hi How are you all ? I hope you are well. This is ankush panchal currently working as a senior engineer in multitech industries limited.Before joining as a engineer I worked 2 year as a lecturer in polytechnic college in mechanical department.Actually I love teaching/guiding students.Whatever content I give to my students its to the points and...

  • India
  • $4-7/hour
  • 0.0 yr.
  • 2.0 yr.