Prof. Ajay K. Lohate Expert in Industrial Automation [PLC, SCADA,HMI]
No reviews yet

Dear Students,

As we know, most companies are using a variety of PLC, SCADA, HMI, and AutoCAD Electrical. So there is a huge requirement for the job in the automation sector like PLC programmer, Project Engineer, SCADA Operator, PLC, Commissioning Engineer, Control Engineer, Senior Design Engineer, Service Engineer, etc. Learn PLC programming, HMI, SCADA, and Drives from beginner to advanced here. I have worked on various PLCs and HMI's like Allen Bradley PLC, Delta PLC(WPL Soft), Siemens S7 300 & S7 400 (Simatic Manager v5.6), Mitsubishi PLC (Melsoft), ABB PLC, SCADA (Wonderware In-touch), Delta HMI (DOP Soft), Allen Bradley HMI, Schneider PLC, TIA (Totally Integrated Automation) Portal S7 1200.

The participant will be able to,
-Learn PLC Programming with projects
-Learn how to design ladder logic in MULTISIM.
-Learn the use of PLC in the industrial sector.
-Learn How to design industrial projects based on PLC.
-Learn PLC-based field I/O connections.
-Learn a selection of digital and analog I/Os for the projects based on PLC. Selection criteria for the PLC
- Learn How to create a datasheet or document, so that logic and idea required for the project are clear.
-Identify and assemble the information of physical parameters using PLC analog programming.
-Identify the strength and limitations of Allen Bradley PLC for acquiring information, Simulating, and monitoring system performance.
-Identify and describe the role of the project engineer in terms of safety considering societal aspects.
-Develop the PLC ladder diagram for temperature control, traffic control, and many more.
-Learn an introduction about Automation and Allen Bradley PLC(Why it is needed, Opportunities in the Future, Role of Engineer, etc.).
-Learn an introduction about Rslinx Classic, Rslogix micro English & field I/O connections of Micrologix PLC, and create a new project.
-Learn the Ladder diagram, and interfacing of push-button and lamp to verify all logic gates (2 Push Buttons and 1 Lamp).
-Learn Program for water level management (NO and NC-based program using actuators and sensors).
-Learn Remote controlling applications, Set/Reset operations by using two push buttons.
-Learn a Smart traffic signal control system using PLC (Push-button, Indicators & hooter).
-Learn a PLC-based program for entry/exit control of car parking using indicators, sensors, push-buttons, and maintenance switches (UP/DOWN counter-based program).
-Design a program based on a counter and timer for lamp ON/OFF operation (Counting ON/OFF operation of lamp).
-Sequence control programming using SQO (water bottle Manufacturing plant).
-Learn the process of designing the ladder program for any industrial project with its project data sheet.
-Learn temperature control programming with fault identification using SCP (RTD analog module, heater, cooler, push-button, indicator & hooter).
-Learn monitoring and recording of Temperature data with time in a third-party database (excel) using the PLC & SCADA Data logging feature.
-Learn the development of residential and industrial-based projects.

Subjects

  • PLC Programming - Ladder Logic Beginner-Expert

  • Industrial Automation (PLC, SCADA, DRIVES, HMI) Beginner-Expert

  • TIA Portal Beginner-Expert

  • SCADA - Supervisory Control And Data Acquisition Beginner-Expert

  • PLC Programming with Allen Bradley (MicroLogix and SLC type PLC) Beginner-Expert

  • PLC Programming (Ladder, Function Block Diagram, Sequential Function Chart, Structure Text) Beginner-Expert

  • HMI Programming Beginner-Expert

  • 10+ Industrial Real-Time Projects Beginner-Expert

  • Siemens TIA Portal S7-1200, S7-1500 Beginner-Expert

Experience

  • Assistant Professor (Feb, 2021–Present) at Marathwada Mitra Mandal’s College of Engineering, Pune.
    1] Provided Industrial Automation Training to 35+ Different Companies as “a Trainer” (During June 2020 – June 2021-Industrial Aspirant)

    2] Provided Industrial Automation training to 25+ different private and government colleges as “a Trainer” (During June 2018 – June 2021 Industrial Aspirant).

    3] Provided the training in industrial automation to students from beginner to advanced on below mentioned,
    A) Allen Bradley (AB) PLC
    -Hardware: SLC 500 and Micrologix 1000, 1100, 1400, 1500 controller
    -Software: RS Linx Classic, RS Logix 500 English
    -Ladder Language, Timer and counter block application, and programming
    -Sequence Control Programming
    B) Siemens S7 300/400- Simatic Manager 5.6
    -Advance PLC instructions, timer and counter-programming, creating functions,
    -Troubleshooting and Fault diagnostics of PLC
    C) TIA Portal V15 (Total Integrated Automation Portal) S7-1200 and S7-1500
    D) Scada (Wonderware Intouch)
    -Creating and accessing real-time and historical trends, Alarms, and Event
    -Communications of PLC with SCADA & HMI along with troubleshooting
    E) HMI (Human Machine Interface)
    -Delta B Series DOPBO75411 2, Data Operation Panel (DOP) Software
    F) Delta PLC (WPL SOFT) DVP14SS2.
    G) GE Fanuc-Versamax Nano/Micro PLC, S/W-Proficy Machine Edition.
    H) AutoCAD: Schematic Diagrams and Panel Layout

    4] Worked on portfolios like Centre of Excellence (CoE) In-charge, Eduskills Co-ordinator, Institutions Industry Cell Co-ordinator, Skill Development In-charge, Sports Co-ordinator, etc.

    5] I have launched the course “Learn Industrial Automation with 5+ Real Projects using PLC” which has been approved by Udemy and is now live in the marketplace. The students from 16 countries (India 79.4%(104), United States of America 6.9%(9), Canada 1.5%(2), United Kingdom1.5%(2), Nigeria 1.5%(2), South Africa1.5%(2), United Arab Emirates 0.8%(1), Brazil0.8% (1), Hungary 0.8%(1), Japan0.8%(1), Kenya0.8%(1), Mexico0.8%(1), Netherlands0.8%(1), New Zealand0.8%(1), Sierra Leone0.8%(1), Turkey 0.8%(1)) are doing this course. Udemy is a global online learning platform.
  • Project Engineer (Nov, 2017–Feb, 2020) at Prolific System’s & technologies PVT LTD, Pune.
    Worked on various PLCs and HMI's like Allen Bradley PLC, Delta PLC(WPL Soft), Siemens S7 300 & S7 400 (Simatic Manager v5.6), Mitsubishi PLC (Melsoft), ABB PLC, Scada (Wonderware In-touch), Delta HMI (DOP Soft), Allen Bradley HMI, Schneider PLC, TIA (Totally Integrated Automation) Portal S7 1200.

    Worked on 10+ different projects based on industrial automation aa a " Project Head".

Education

  • Power Electronics and Drives (PE & D), Electrical Engineering (Aug, 2016–Dec, 2018) from Gokhale Education society's, R.H. Sapat College of Engineering, Management and Research, Nashik.
  • Electrical Engineering (Jun, 2012–Jun, 2016) from Amrutvahini college of Engineering (AVCOE), Sangamner.

Fee details

    ₹1,000–5,000/hour (US$11.98–59.88/hour)

Store

Reviews

No reviews yet. Be the first one to review this tutor.